This hose is used to connect a high-pressure pump and various cleaning equipments.
It is flexible and has sufficient strength to withstand repeatedly-applied pressure.

It is a valve that allows the starting and stopping of discharging high-pressure water by simply stepping on the pedal.
There are two kinds of valves; stop type and purge type.

It is a lance for cleaning tubes curved pipes.
One end is connected to, e.g., the foot valve, and the other to various cleaning nozzles.

It is a nozzle for tube cleaning. There are eight types, which differ in the discharge direction of the high-pressure water.
It is connected to a lance or flexible lance.

It is a spinning nozzle for the powerful cleaning of the inner surfaces of tubes.
It rotates rapidly with the help of the reaction force of high-pressure water discharged from the nozzle.
Since it removes scale while spinning, it can clean the inside of the tube completely.

It is a lance for straight pipe cleaning. The front end is attached to various types of nozzles.
Even if the pipe is blocked by scale, it can be cleaned by poking back and forth with the lance.

This gun allows the worker to freely start and stop the injection of high-pressure water by hand.
Since the injection is immediately stopped upon release of a trigger.

These nozzles that can be attached to a grip jet gun.
There are two types; direct jet nozzle and flat jet nozzle. Choose one in accordance with the intended cleaning.

It is a tube cleaning machine for heat exchangers and steam condensers.
Since a constant-speed feed is possible, it can uniformly clean the inner surface of tubes.