Technical Advices - SUGINO MACHINE

» What is Superoll processing?

» Processing conditions

» How to adjust and set tool diameter (SH/SB series)

» Variations in internal diameter

» Effects of Superoll processing

» Replacing consumable parts

Technical Advice


	1. Replacing rollers Turn the housing nut counterclockwise to be removed. Next the frame and stem are both pulled out together. Note: Replace the rollers with their larger diameter ends facing the tool head. Replace the entire set of rollers at the same time. If new and old rollers are mixed together the tool performance will be diminished creating abnormal abrasion or low precision results. 2. Replacing the frame Turn the housing nut counterclockwise and remove. Next insert a push rod into the hole of the frame and stem while turning it counterclockwise and the frame can be removed. 3. Replacing the mandrel The mandrel is threaded on the shank. Turn the body on the mandrel counterclockwise and it can be removed off of the shank.

SH/SB series


	1. Replacement of rollers Loosen the set screws (3) on the thimble and remove the head. If the head is extended forward and the spring compressed the head can be pulled off of the frame and the rollers exchanged. Note: Set the roller with its larger diameter end facing the tool head. Exchange the complete set of rollers. If new and old rollers are mixed together the tool performance will be diminished creating abnormal or low precision results. 2. Replacing the frame Remove the head from the thimble and pull the frame ring out. Loosen the set screws (3) of the frame ring and remove the frame. 3. Exchange of head Loosen the set screws (3) of the thimble and remove the head.

SA series

[ BACK to TOP ]