Cantilever Shaped Abrasive Type Ultrahigh-Pressure Water Cutting Equipment "Abrasive Jet Cutter NC"
Space-saving & low initial cost cutting device!
"Abrasive jet cutter NC" is a device that mixes abrasive material injection into the water jet and can be used to cut a plane of any hard material into any shape.
■ Stroke
X-axis: 2,000 mm (nozzle movement)
Y-axis: 1,000 mm (nozzle movement)
Z-axis: 150 mm (nozzle movement)
Features
- Space-saving
Space-saving has been realized by using the cantilever system and independently developed nozzle structures. - Reduction of initial cost
Initial costs have been reduced by the reduction of component parts.
Processing Example
Specifications
Movement range | X-axis | mm | 2,000 |
Y-axis | 1,000 | ||
Z-axis | 150 | ||
Movement speed | m/min | X, Y-axis: 0 - 10 Z-axis: 0 - 5 | |
Movement method | ― | Nozzle movement | |
The number of controlled axes | ― | Simultaneous 3-axis control (X, Y, Z) | |
Drive system | ― | AC Servo motor | |
NC controller | ― | FANUC 32i series | |
Minimum setting unit | mm | 0.001 | |
Machine accuracy | Positioning | mm | X, Y-axis: ± 0.05/500 Z-axis: ± 0.1 |
Repeat | mm | X, Y-axis: ±0.05 Z-axis: ±0.1 | |
Dimensions | Width | mm | 3,100 |
Depth | mm | 1,800 | |
Height | mm | 3,000 | |
Dry mass | kg | 3,500 |
Note: Other cutting equipment is also available. Please contact the nearest Sugino sales office.
Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.