Selfeeder Dual MS6-DS: Drilling and Tapping Multipurpose Unit
Versatile, state-of-the-art machine for drilling and tapping!！
This multipurpose unit "Selfeeder Dual" allows you to highly accurate drilling and tapping without having to use any other machining equipment. It features high-power servo motors for ram feed and spindle rotation and perfectly synchronizes both movements. The unit accommodates changes in design, without replacing the feed gear.
>Click here for production transition notice
＞Introduction of successor products
Features
1. A Single Machine Enables Drilling and Tapping in Flexible Ways
The machine is equipped with high-power servo motors for ram feed and spindle rotation to achieve perfect synchronization. It enables highly precise and efficient drilling and tapping.
Powerful unit with capacity to tap large holes up to M27 in aluminum.
2. Change the Thread Pitch and Machining Patterns with Ease
For changing the thread pitch, just replace the tools and enter a program. Gear replacement is unnecessary. Moreover, various built-in machining patterns are provided, allowing you to machine workpieces simply by operating the touch panel.
3. Energy saving and Space saving
Unit type can control up to 4 units with one programmable logic controller.
Drilling machine type can be operated on the same day by connecting the main power supply.
Unit type
Four units can be controlled with one programmable logic controller!
Drilling machine type
Reduced 50％ less installation space!
Specifications
| Model No. | No-load Rotation speed |
Spindle Nose Shape |
Chuck Operating capacity |
Maximum drilling and tapping capacity |
Spindle motor |
Thrust | Rapid traverse speed | Weight | |||
| 50Hz | 60Hz | AL | FC | ST | |||||||
| min－1 | ― | mm | mm | kW | N | mm/sec | kg | ||||
| MS6-DS-2416 | Max. 1,680 | Stub holder（KH-32E NT tool) |
3.6～22.0 | 21 | 19 | 16 | 5.0AC servo | Max. 4,630 |
Max. 183 |
120 | |
| M22 | M14 | M14 | |||||||||
| MS6-DS-2409 | Max. 940 | 26 | 23 | 20 | |||||||
| M27 | M18 | M18 | |||||||||
Note：
1. To select your model, refer to the workpiece configurations, material, cutting properties, diameter of the hole, and rotation speed.(cutting speed)
2. The upper row of the maximum drilling/tapping capacity section shows the maximum drilling capacity. And lower row shows the maximum tapping capacity.
3. The drilling capacity shown above corresponds to a depth equivalent to the drill diameter times two. A spiral type or point type tapping tool is used to determine the tapping capacities.
Tapping capacities are conditional on the depth of tapping being limited to 1.5 times the tap diameter.
4. Holding brake is equipped with the feed motor.
5. AL*…Aluminium, FC*…Cast Iron, ST*…Steel
Dimensions(mm) （Unit type）
 |  |  |
|---|
Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.
