Selfeeder Mechatric SSM4: Servo Feed Drilling Unit
A servo feed drilling unit for which you can set the feed and rotation speed freely!
"Selfeeder Mechatric SSM4" is servo feed drilling unit which can set the spindle rotation speed and feed rate freely within the program, ideal for small diameter, deep hole drilling.
High efficiency processing can be performed by the coolant / center through (optional).
>Click here for production transition notice
>Introduction of successor products
Specifications
Feed shaft motor: 0.4 kW AC Servo motor
Model number | No-load rotation speed |
Spindle nose shape (collet chuck) |
Chucking capacity | Maximum drilling capacity | Spindle motor |
Thrust | Rapid traverse |
Cutting feed speed |
Weight | |||
50 Hz | 60 Hz | Aluminum (ADC) |
Cast iron (FC200) |
Steel (S45C) |
||||||||
min-1 | mm | mm | mm | kW | N | mm/sec | kg | |||||
SSM4-1673 | 1,470 - 7,320 | ER25 | 0.5 - 16 | 6 | 5 | 4 | 0.75 DC Brushless motor Rated 3,600 min-1 |
2,320 | Max. 150 |
Max. 16.7 |
60 | |
SSM4-1636 | 720 - 3,600 | 8 | 7 | 6 | ||||||||
SSM4-1618 | 360 - 1,800 | 11 | 9 | 8 | 0.75 DC Brushless motor Rated 1,800 min-1 |
|||||||
SSM4-1608 | 180 - 880 | 16 | 12 | 11 |
Notes:
1. The selection of models should be based on the shape of the workpiece, material, cutting characteristics, diameter and material of tools, rotation speed (cutting speed), etc.
2. The drilling capacity displayed in the above table is based on values representing a drilling depth of two times the diameter of the drill.
3. The power voltage of main shaft inverter has three phases (single phase for feed rod controller) AC 200 V ±10% 50/60 Hz.
4. For servo motor with holding brake (option) specifications, add "B" to the end of the model number.
5. For coolant center through specifications, add "CL" to the end of the model number.
Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.