Selfeeder Varimec SSV3 Type: Servo Feed Drilling Unit
A compact, servo feed drilling unit capable of small-diameter, deep hole drilling!
The "Selfeeder Varimec SSV3 Type" is a short, compact servo feed drilling unit capable of small-diameter, deep hole drilling.
Perfect for flexible, hole-drilling processing machine manufacturing at a low price.
>Click here for production transition notice
>Introduction of successor products
Specifications
Spindle motor: 0.4 kW DC brushless motor / Feed shaft motor: 0.4 kW AC servo motor
Model number | No-load rotation speed | Spindle tip shape (collet chuck) |
Chucking capacity |
Maximum drilling capacity | Thrust | Rapid traverse speed |
Cutting feed speed |
Weight | |||
50 Hz | 60 Hz | Aluminum (ADC) |
Cast iron (FC200) |
Steel (S45C) |
|||||||
min-1 | mm | mm | mm | N | mm/sec | kg | |||||
SSV3-7100C | 1,000 - 10,000 |
ER11 | 0.5 - 7.0 | 6.5 | 5 | 4 | 1,660 | Max. 200 |
Max. 16.7 |
43 | |
ER20 | 0.5 - 13.0 | ||||||||||
SSV3-1626C | 265 - 2,650 |
ER20 | 0.5 - 13.0 | 12 | 9 | 8 | |||||
ER25 | 0.5 - 16.0 |
Notes:
1. The selection of models should be based on the shape of the workpiece, material, cutting characteristics, diameter and material of tools, rotation speed (cutting speed), etc.
2. The drilling capacity displayed in the above table is based on values representing a drilling depth of two times the diameter of the drill.
3. The power voltage of the main shaft inverter has three phases (single phase for the feed shaft controller) AC 200 V ±10% 50/60 Hz.
4. For servo motors with holding brake (optional) specifications, add "B" to the end of the model number.
Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.