Top of the page To the text skip menu
HOME > International Manufacturing Technology Show (IMTS2018)
Display print image

International Manufacturing Technology Show (IMTS2018)

imts2018 For further details, visit:

Overview of the show

Sugino Machine Ltd. will exhibit at IMTS 2018.

September 10 - 15, 2018 Sugino Machine will be at the show,  providing you with selective business solutions by our featured products.

DatesSeptember 10-15, 2018

McCormick Place
2301 S Lake Shore Dr • Chicago, IL 60616 USA

Booth No.

338566 South Building, Level 3

  • Washing and deburring machine
  • 5‐Axis Compact Machining Center
  • 30‐Taper Machining Center
  • Conveyor Spray Washer
  • Drill and Tap Units
  • Deburring Tool Holder
  • Burnishing Tools


Washing and Deburring Machine "JCC "

JCC603ROBOThe "JCC(Jet Clean Center)" is an high pressure Deburring and Washing Machines capable of removing residual chips and burrs inside a workpiece by jetting high pressure water at  Max. 245 MPa.

Sugino Machine is the world's one and only washing machine manufacturer that manufactures from high-pressure pumps to washing machines.

5-Axis Simultaneous Control Compact Machining Center "Xion α-5AX"

Xion α-5AXExtremely compact design with the machine width at 1,260mm. This compact super-precision and 5-axis simultaneous control machining center has a wide machining area.

Best suited for precision and micro machining such as impellers, turbine blades, lens molds, medical equipment and electronic parts.

30‐Taper  Compact Machining Center "SELF-CENTER"


The "Self-Center VC15" is a compact, high-precision machining center equipped with a turntable.

Because workpieces can be removed and mounted during processing, idle time has been reduced and productivity has been increased.


Drilling and Tapping Unit "SELFEEDER"

SELFEEDERIt's been a half century since its release.The "Selfeeder" drilling units are now global standards.
These units, which are an accumulation of technology and know-how over many years,
are installed at sites worldwide.

Deburring Tool Holder "BARRIQUAN"

BarriquanThe "Barriquan" is an tool holder with a floating structure built in to the bit.
Keep tools at a constant pressure against workpieces to allow profiling.
Allows the pressing force to be adjusted easily to suit burr size.

BARRIQUAN (TM) Robotic Deburring Machine

BarriquanRoboticDeburringMachineThe Sugino Barriquan(TM) Robotic Deburring Machine is an automated cell which features dual Barriquan hi-speed spindles on an end-of-arm KUKA robot, designed to replace manual deburring in your factory.

In addition to the 6-axis robot, there is a rotary positioning table to give full 7-axis capabilities for deburring the most complex of parts.

The Barriquan Robot Deburring Cell also features the KUKA smartPA(TM) controller, stainless steel constructed framework, Lexan windows, a sliding front door assembly with safety switches, a removable chip tray, and forklift pockets for easy transport.

This machine is equipped with a dual spindle set-up for deburring pipe ports, holes, or edges at surface and underside without changing tools, and for casting profiles, flash removal, or brushing.

Simple to program for high-volume/low-mix or low-volume/high-mix production.

Roller Burnishing Tool "SUPEROLL"

スパロールThe tools provide a mirror finish by smoothing metal surfaces with rollers. The rollers crush the surface of  metal parts such as brake and master cylinders, and piston pin hole, causing plastic deformation and improving durability and wear resistance. Superoll's mirror finishing meets every type of production needs. 

For more details, please visit our booth  to find out!


Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.