Self-Center NSV15-Ⅱ: #30 Vertical Compact Machining Center
High-speed and high-precision machining is realized by improving core performance!
The "Self-Center NSV15-Ⅱ" is 30-taper class compact machining center with 40-taper class machining capabilities.
The use of the latest feed guide and spindle, as well as enhanced motor performance result in both greater rigidity and a reduction in cycle time.
Basic specifications
Vertical #30
X:300 mm
Y:400 mm
Z:400 mm
Number of tools mounted
27 Tools
Maximum spindle
rotation speed
12,000 min-1
(Optional : 20,000)
Allowable load
250kg



* Supported opition
Machining capacity
Drilling
・Aluminum φ25 mm
・Cast iron φ22 mm
・Steel φ 18 mm
Tapping
・Aluminum M24 mm
・Cast iron M20 mm
・Steel M16 mm
Milling cutter
・Aluminum 200 cm
・Cast iron 60 cm
・Steel 35 cm
Features of the NSV15-Ⅱ
1. Superior cost performance
Superior cost performance is achieved through a simple structure consisting of column Z traverse and table XY traverse. Furthermore, the unit can easily be combined with transfer devices such as a gantry loader.
2. High speed and high rigidity
CAE structural analysis has both reduced body weight and made the machine fast and rigid. This reduces idle time and facilitates high precision machining.
Specifications
Stroke | X-axis | mm | 300 |
Y-axis | mm | 400 | |
Z-axis | mm | 400 | |
Table | Working area | mm | 600 × 400 |
Allowable load | kg | 250 | |
Distance from table surface to spindle nose | mm | 150 ~ 550 | |
Spindle | Spindle taper | - | NT30 |
Standard | min-1 | 12,000 2.2kW | |
High speed | min-1 | 20,000 2.2kW | |
Coolant through | min-1 | 12,000 3.7kW | |
High-torque | min-1 | 12,000 3.7kW | |
Feed | Rapid feed rate | m/min | 54 |
Cutting feed rate | m/min | MAX.10 | |
Min. programmable unit | mm | 0.001 | |
Accuracy | Positioning | mm | 0.004 |
Repaetability | mm | ±0.001 | |
ATC | Number of tools | - | 27 |
Tool to Tool | sec | 0.8(at high-speed ATC) | |
Tool shank | - | BT30(Pull stud MAS P30T-2) | |
Maximum tool dimensions | mm | φ60 × 200 | |
Maximum tool weight | kg | 2.0(3.5 at low-speed ATC) | |
Tool selection | - | Memory randam | |
Machine | Width×Length×Height | mm | 1,200×2,200×2,650 |
Weight | kg | 3,000 | |
Power Source | Power supply | - | 3-phase AC200V ±10%、50/60 Hz |
Power capacity | kVA | 34 | |
Air pressure | MPa | 0.4 ~ 0.6 | |
Air consumption | L/min(ANR) | MAX.100 |
Notes:
1. The QZ lubrication system (standard) is used for lubrication of ball screws and linear guides of the feed axes.