Self-Center NSV15: #30 Vertical Compact Machining Center

Heavy cutting thanks to its high-rigidity ball screw! A Self-Center for a wide range of processing requirements!

The "Self-Center NSV15" is a compact machining center that maintains a wide range of movement to enable processing of large parts and simultaneous processing of multiple workpieces.
The unit is capable of heavy cutting by using a high-rigidity ball screw.

Basic specifications

stroke Virtical #30
X: 500 mm
Y: 400 mm
Z: 300 mm

tools Tool attachments
15 tools
* Optional
27 tools

speed Maximum spindle
rotation speed
15,000 revolutions
2.2 kW

table Allowable load
250 kg

　
　
　 * Supported options

Processing capacity

Drilling

Aluminum φ25 mm
Cast iron φ22 mm
Steel φ 18 mm

Tapping

Aluminum M24 mm
Cast iron M20 mm
Steel M16 mm

Milling cutter

Aluminum 200 cm³/min
Cast iron 60 cm³/min
Steel 35 cm³/min

Advantages of the NSV15

1. Superior cost performance

Superior cost performance is achieved through a simple structure consisting of column Z traverse and table XY traverse. Furthermore, the unit can easily be combined with transfer devices such as a gantry loader.

ｘｙｚ

2. Processing area of 500 × 400 mm

A wide range stroke design with an X-axis of 500 mm and Y-axis of 400 mm allows large-size parts to be processed. The unit also supports simultaneous processing of multiple small parts.

xystroke

3. High speed and high rigidity

CAE structural analysis has both reduced body weight and made the machine fast and rigid. This reduces idle time and facilitates high precision processing.

Specifications

Stroke	X-axis	mm	500 (table traverse)
	Y-axis	mm	400 (table traverse)
	Z-axis	mm	300 (column traverse)
Table	Working area	mm	600 × 400
	Allowable load	kg	250
	Distance from table surface to spindle nose	mm	150 - 450
Spindle	Spindle taper	-	NT30
	Standard	min^-1	12,000 2.2 kW
	High speed	min^-1	15,000 2.2 kW
	Coolant through	min^-1	12,000 3.7 kW
	High-torque	min^-1	12,000 3.7 kW
Feed	Rapid feed rate	m/min	40 (X, Y, Z-axis)
	Cutting feed rate	m/min	Max.10
	Min. programmable unit	mm	0.001
Accuracy	Positioning	mm	0.004 (in full travel)
Accuracy	Repeatability	mm	±0.001
Turret	Number of tools	-	15 (optional 27)
	Tool to Tool	sec	1.0
	Tool shank	-	BT30 (Pull stud MAS P30T-2)
	Maximum tool dimensions	mm	φ 60 × 200
	Maximum tool weight	kg	2.0 (3.5 at low-speed ATC)
	Tool selection	-	Memory random
Machine	Width × Length× Height	mm	1,570 × 2,120 × 2,370
Machine	Weight	kg	2,800
Power Source	Power supply	-	3-phase AC 200 V ±10%, 50/60 Hz
	Power capacity	kVA	Max.18
	Air pressure	MPa	0.4 - 0.6
	Air consumption	L/min (ANR)	Max. 100

Notes:
1. The QZ lubrication system (standard) is used for lubrication of ball screws and linear guides of the feed axes.
2. Standard color : SUGINO Dark-gray (base), SUGINO Off-white (splash guard), and SUGINO Blue-green (front door)

Dimensions

nsv15dimension

Notes:
1. Maximum tool dimensions refer to the length from the tool gauge edge to the tool tip.
2. Please inquire separately regarding the specific dimensions.

infobar