Cat’s Eye: Multi Processing Diamond & Burnishing Tools
The Diamond & Burnishing Tool “Cat’s Eye” uses a diamond tip to enable surface improvements to extremely hard materials (HRC60 or lower).
Disposable type with easy chip replacement
Applicable machines: Lathe
Example of processing with the Superoll Cat’s Eye
Outer surface processing Attachment to the NC lathe
Features of the Superoll Cat’s Eye
- One tool is compatible with various sizes of workpieces.
- It can be attached to a standard tool holder. The end tip is disposable and easy to replace.
Dimensions
Specifications
CEH Type| Tool type and number | Processing parts | Minimum processing diameter | Shank diameter | Maximum processing length | Tip model number |
|---|---|---|---|---|---|
| mm | mm | mm | |||
| CEH-2D1-R25 | Inner surface | φ13 | φ25 | 45 | DT2D1 |
| CEH-4D1-R25 | φ20 | 60 | DT4D1 |
Note: We also manufacture shanks with a φ 25.4 mm.
CEO and CEF types
| Tool type and number | Processing parts | Shank diameter | Coupling direction | Tip model number | |
|---|---|---|---|---|---|
| mm | |||||
| CEO-4D1R-S25 | Outer surface | φ25 | Right | DT4D1 | |
| CEO-4D1L-S25 | Left | ||||
| CEF-4D1R-S25 | End face | Right | |||
| CEF-4D1L-S25 | Left | ||||
Note: We also manufacture 20 mm and 16 mm shank models.
Processing requirements guide
| Tool type and number | Processing parts | Workpiece hardness | Built-in screw precompression | Peripheral speed | Feed rate | Surface roughness |
|---|---|---|---|---|---|---|
| HRC | N | m/min | mm/rev | before processing (Rz) | ||
| CEH-4D1-R25 | Inner surface | 45 | 180 | 50 - 200 | 0.05 | 4.0 |
| 60 | 900 | |||||
| CEO-4D1R-S25 | Outer surface | 45 | 40 | |||
| 60 | 200 | |||||
| CEF-4D1R-S25 | End face | 45 | 40 | |||
| 60 | 200 |
 |  |  |
|---|
Click here to make inquiries and requests for technical advice, specifications, price and catalogs. Please feel free to contact us.
