JCC 421 UT : CNC Turret Type Submerged Washing & Drying Machine

 Improve productivity by integrating processes

This washing machine simultaneously achieves both submerged cavitation washing and target air blowing using a column robot. Contributes to process integration and space saving.

Significant reduction in cycle time

The performance of the XYZ column and NC rotary table has been improved, and thus greatly reduce the cycle time.
・Rapid Feed Rate : 25％UP
・Acceleration : 70％UP
・Cycle time reduced by 30%

Expanded washing feature with servo motor-driven pump

Servo motor-driven pump makes it possible to monitor pump stop condition.
In addition, the washing pressure can be changed from a program, enabling washing under optimum conditions according to the target.

Improved cleanliness

Increased flow rate at low-pressure washing has improved the ability to remove contaminants on the surface of the workpiece.
Our tenacious efforts on improving cleanliness have led to add internal washing feature to prevent reattachment of chips.

Ideal for large aluminum case parts

It is possible to perform 6-sided cleaning of large workpieces, which was previously difficult to perform precision aim cleaning by expanding the stroke and submerged cleaning tank.

Applicable workpiece size：650×450×450mm

Significant space savings

"JCC 421 UT" integrates the processes that were conventionally carried out in two machines, a submerged washing machine and a drying machine. Installation space is significantly reduced.