POWTECH 2023

For further details, visit: https://www.powtech.de/en

Overview of the show

The mechanical processing technology community meets again from 26 - 28 September 2023 in Nuremberg, Germany.

POWTECH will reflect the fact that in many sectors, powder and bulk solids processing is being combined with fluid and liquid technologies to form an integrated process, and therefore the event specifically incorporates the processing and handling of liquids in its product range. Make sure you are part of the 2023 event with its new topics and technologies.
 
We enclose a free admission voucher and sincerely invite you to visit us on stand 4-160 at POWTECH 2023, where we will be pleased to present our latest products manufactured in JAPAN.  Please register at https://www.powtech.de/en/visitors/tickets/voucher with the voucher code: A501837.

Exhibits

 Wet milling and dispersing device "Star Burst"

Star Burst is a wet-type micronizing device to disperse, emulsify, comminute and delaminate particles by the collision of the ultra-high pressurized slurry in our original chambers.

Maximum pressure is 245MPa (2.450 bar or 35.525 psi).
Star Burst Mini  is the ideal partner in the development of cutting-edge, high value materials with extremely small material preparations with maximum yield.

[Applications] 

Carbon Materials and Clays for Batteries, Additives, Fillers, Cosmetics
Ceramics, Metals and Metal Oxides for Electronics
Pigments for Inkjet ink and Cosmetics
Emulsions for Cosmetics and Pharmaceuticals
Cellulose for nanofiber application

Twin Impeller Dry Mill "Dry Burst Mini (DB-100S CE)"

The "Dry Burst DB-100S CE" is a space-saving dry-type milling device that supports continuous production of low-contamination powder with a particle diameter of less than 10 µm.
The powder is produced by colliding the raw material particles with one another using the air flow generated by two rotating impellers.
Compared with jet mills, the particle diameter can be better adjusted without over-pulverization.
Furthermore, the running costs are lower since the unit's power consumption is low.

Processing capacity
～4 kg/hr

Biomass nanofiber "BiNFi-s"

"BiNFi-s" is a series of ultra-fine fiber which is produced by SUGINO MACHINE's ultra high pressure water jet technology. It made from biomass like cellulose, chitin and chitosan. The size is about 10-20nm width and several ㎛ length in average.

In general, cellulose nanofibers/nano-cellulose, chitin nanofibers, and the like are used as raw materials. Applied development and research has been actively conducted in Japan and overseas in recent years.

It has low linear thermal expansion, effect elasticity, transparency, biocompatibility, antibacterial features, improvement of physiological functions, high strength, high aspect ratio, high specific surface area, high viscosity, high shape retention, and high hydrophilicity, and is expected to be used in a variety of fields.

For more details, please visit our booth  to find out!

Click here to make inquiries and requests for technical advice, specifications, price, and catalogs. Please feel free to contact us.