Jet Storm Washer M-type: Aeration Jet Type Punch and Die Washing Machine

JET STORM WASHER-M
The “Jet Storm Washer M-type” is an aeration jet type submerged washing machine capable of automatically performing all processes from washing, degreasing, air blow, and hot-air drying.
The punches and dies of the tableting machine for the pharmaceutical and food industry can be washed simultaneously. Accurate washing is performed in a short period through a jet stream and aeration based on a half-submergence system.
In spite of a small size, a large number of punches and dies can be washed, because of which a high cost performance is exhibited.
Features
The compact main unit contains a large washing tank
Even at a width of 770 mm, the washing machine is provided with a 65-L washing tank which can be used to simultaneously wash 72 sets of punches and dies.
High power washing and degreasing performance
Because of the upper rotating nozzle and swirling flow, the residual medicines can be washed away without leaving any blind spots. As a result of the aeration jet and heating, high power degreasing and removal of impurities is achieved without the use of an organic solvent.
Tank cleaning mode
After a series of operations, the machine is equipped with a mode that washes away any residue in the tank and piping with purified water, preventing cross-contamination between objects being cleaned.
Automatic and Batch Execution of Processes from Washing to Drying
All processes from submerged and open-air washing to water cutting by air blowing, and hot-air drying are performed automatically. Products are dried immediately after washing without going through human hands, which prevents the occurrence of rust and water marks.
Washing tank

Aeration Jet Schematic Diagram

Specifications
Max. number of punches and dies | – | 72 upper punches, 72 lower punches, 72 dies |
Washing Method | – | Aeration jet washing (half-submerged washing) |
Pump pressure | MPa | 0.8 |
Flow Rate | L/min | 60 |
Washing Temperature | ℃ | Max.60 |
Drying Temperature | ℃ | Max.80 |
Main Unit Dimensions (W X D X H) | mm | 850×1,100×1,150 |
Weight | kg | 400 |
Power supply | ― | 200 VAC, 3-phase, 10 kVA |