Single Roller Superoll SR16M Type: Multi Surface Use Roller Burnishing Tools
The "Single Roller Superoll SR16M Type" multi surface roller & burnishing tool is a burnishing tool for processing outer surfaces and edges that can be attached to a CNC automatic lathe and other equipment.
Applicable machines: Lathe
Applicable machines: Lathe
Features of the Single Roller Superoll "SR16M Type"
- Processing of outer surfaces and edges is possible with one single tool.
- It can be attached to a CNC lathe
- The precompression can be set and processing can be carried out on workpieces with key grooves and D cuts.
- Its unique screw load system realizes a compact design.
- Its simple structure means low cost.
Processing Examples
Guide shaft
Attachment to the NC lathe
SR16M Type: Non-burnished Area
Roller tip R section | Non-burnished Area |
mm | mm |
R0.5 | 1 |
R1.5 | 2 |
R3 | 3.5 |
Note: The value for the non-burnished area shown above applies when a clearance of 0.5 mm between the edge of the workpiece and the tool end is secured.
Dimensions
SR16M Type Processing Requirements Guide
Tool type and number | Work Materials | Peripheral Speed | Feed rate | Preload | |
m/min | mm/rev | N | |||
SR16NR1.5R45°-S10 | Alloy steel | 100 - 200 | 0.05 - 0.1 | 42.5 - 166 | |
SR16NR1.5R45°-S12 | |||||
SR16NR1.5L45°-S10 | |||||
SR16NR1.5L45°-S12 |
Click here to make inquiries and requests for technical advice, specifications, price and catalogs. Please feel free to contact us.