Ultrahigh-Pressure Water Cutting Equipment "Water Jet Cutter NC"

WJC (labbercutting) Water jet cutting standard!

"Water Jet Cutter NC" is a device that cuts soft, flat surface materials into optional shapes by using a water jet only.
There are two types to choose from, a table movement type and a nozzle movement type to match the shape of the object.

Line-up

Table movement type

■ Stroke
X-axis: Max.2,500 mm (table movement)
Y-axis: Max.1,600 mm (nozzle movement)
Z-axis: 200 mm (nozzle movement)

WJCT

Suitable for cutting small, light objects. Simultaneous movement of the nozzles and the catcher units receiving the water jets results in reduced water splash, reduced noise and easy maintenance.

Nozzle movement type

■ Stroke
X-axis: Max.3,100 mm (nozzle movement)
Y-axis: Max.1,600 mm (nozzle movement)
Z-axis: 200 mm (nozzle movement)　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

WJCN

Suitable for fixing in place and cutting large objects.

System chart

WJCsystem

Processing example

WJCsample1

Specifications

			Table movement type				Nozzle movement type
			C1010TN	C1516TN	C2016TN	C2516TN	C2010NN	C2516NN	C3116NN
Movement range	X-axis	mm	1,000	1,500	2,000	2,500	2,000	2,500	3,100
	Y-axis		1,000	1,600	1,600	1,600	1,000	1,600	1,600
	Z-axis		200
Movement speed		m/min	X, Y-axis: 0 - 15 Z-axis: 0 - 5
Movement method		―	X-axis: Work movement Y,Z-axis: Nozzle movement				All-axis: Nozzle movement
The number of controlled axis		―	Simultaneous 4-axis control (X, Y, Z, U) X, U-axis simple synchronous operation
Drive system		―	AC Servo motor
NC controller		―	FANUC 32i series
Minimum setting unit		mm	0.001
Machine accuracy	Positioning	mm	X, Y-axis: ± 0.05/1,000 Z-axis: ± 0.1
Machine accuracy	Repeat	mm	X,Y-axis：±0.05 Z-axis：±0.1
Dimensions	Width	mm	2,800	3,800	4,800	5,800	4,000	4,600	5,400
	Depth	mm	2,300	2,900	2,900	2,900	2,300	3,000	3,000
	Height	mm	1,600	1,600	1,600	1,600	2,100	2,100	2,100
Dry mass		kg	4,000	4,500	5,000	5,500	5,000	6,000	7,000