Abrasive Jet Cutter NC-5AX: 5-axis Control Abrasive Type Ultrahigh-Pressure Water Cutting Equipment [standard]
ABRRASIVE JET CUTTER NC-5AX
standard
“Abrasive Jet Cutter NC-5AX – Single-Point Focus Specification Standard Model” is a device that mixes of abrasive material into a water jet (WJ) to cut three dimentional hard material into any shape. It features essential functionalities chosen from high-end models, emphasizing a single-point focus specification. This model excels in high-speed and high-precision cutting of intricate three-dimensional shapes.
Features
Mechanism with single-point focus specifications
It’s a single-point focus specification where the A-axis and C-axis rotate around the machining point of the nozzle.
When performing cutting operations, adjustments to angle and height can be made using the rotation of the A-axis and C-axis, enabling the quickest determination of nozzle orientation. This efficient method avoids the need to move the entire upper drive unit with each nozzle orientation change, allowing for efficient machining.
The A-axis can tilt up to ±50 degrees, while the C-axis can rotate ±360 degrees
Only the necessary functions from high-end models have been carefully selected and installed.
High-speed, High-precision
High rigidity by dual-axis gantry, low center of gravity and symmetry design, and 5-axis controlled single-point focus nozzle head with a maximum tilt angle of 50 degree realize high-speed, high-precision machining.
Convenience
Capable of incorporating wireless active pulse transmitters and automatic calibration units for processing tip adjustment.
Reduction in initial costs
initial costs was reduced by standardizing the drive components of the machining unit and the catcher tank.
Energy-saving performance
By combining it with an Aqua Servo pump, stable processing and energy savings are achieved.
Usability
Equipped with “Sugino Jet Processor”, which incorporates our proprietary machining know-how into a database. Even difficult-to-cut materials can be performed easily.
Processing Examples
Specifications
| Processing Machine |
Max. Stroke |
X-axis | mm | 5,600 |
| Y-axis | 2,600 | |||
| Z-axis | 200 | |||
| A-axis | deg | ±50 | ||
| C-axis | ±360 | |||
| Max. Moving Speed |
X-axis | m/min | 10 | |
| Y-axis | 10 | |||
| Z-axis | 5 | |||
| A-axis | deg/sec | 90 | ||
| C-axis | 180 | |||
| Positioning Precision | ― | X,Y,Z：±0.05mm / A,C：±0.1deg | ||
| NC Unit | ― | FANUC 31i | ||
| Dimensiong (Width×Depth×Height) |
mm | Approx.10,000×4,200×2,700 | ||
| Dry Weight | kg | Approx.5,000 | ||
| Pump | Max. Dischage Pressure | MPa | 600 | |
| Max. Flow Rate | L/min | 3.0 | ||
*Specifications above are just an example.