Water Jet Cutter NC: Ultrahigh-Pressure Water Cutting Equipment

WJC _NC TN

WATER JET CUTTER TN/NN

“Water Jet Cutter NC” is a device that cuts soft, flat surface materials into optional shapes by using a water jet only.
There are two types to choose from, a table movement type and a nozzle movement type to match the shape of the object.

MENU

Line-up

Table movement type

Suitable for cutting small, light objects. Simultaneous movement of the nozzles and the catcher units receiving the water jets results in reduced water splash, reduced noise and easy maintenance.

■ Stroke
X-axis: Max.2,500 mm (table movement)
Y-axis: Max.1,600 mm (nozzle movement)
Z-axis: 200 mm (nozzle movement)

Nozzle movement type

Suitable for fixing in place and cutting large objects.

■ Stroke
X-axis: Max.3,100 mm (nozzle movement)
Y-axis: Max.1,600 mm (nozzle movement)
Z-axis: 200 mm (nozzle movement)

System chart

Specifications

Table movement type Nozzle movement type
C1010TN C1516TN C2016TN C2516TN C2010NN C2516NN C3116NN
Movement
range		 X-axis mm 1,000 1,500 2,000 2,500 2,000 2,500 3,100
Y-axis 1,000 1,600 1,600 1,600 1,000 1,600 1,600
Z-axis 200
Movement speed m/min X, Y-axis: 0 – 15 Z-axis: 0 – 5
Movement method ― X-axis: Work movement
Y,Z-axis: Nozzle movement		 All-axis: Nozzle movement
The number of controlled axis ― Simultaneous 4-axis control (X, Y, Z, U)
X, U-axis simple synchronous operation
Drive system ― AC Servo motor
NC controller ― FANUC 32i series
Minimum setting unit mm 0.001
Machine
accuracy		 Positioning mm X, Y-axis: ± 0.05/1,000 Z-axis: ± 0.1
Repeat mm X,Y-axis：±0.05 Z-axis：±0.1
Dimensions Width mm 2,800 3,800 4,800 5,800 4,000 4,600 5,400
Depth mm 2,300 2,900 2,900 2,900 2,300 3,000 3,000
Height mm 1,600 1,600 1,600 1,600 2,100 2,100 2,100
Dry mass kg 4,000 4,500 5,000 5,500 5,000 6,000 7,000

  • Note: Other cutting equipment is also available. Please contact the nearest Sugino sales office.