"Water Jet Cutter KATANA2" Comapct Ultrahigh-Pressure Water Cutting Equipment

- Energy saving, ultrafine and low environmental impact!
Precisely cuts many types of materials!

"Water Jet Cutter KATANA2" is a cutting device that cuts both hard and soft materials into any flat shapes by jetting a mixture of abrasive materials and water jet.
With a newly developed nozzle of no bigger than Φ0.5mm, it not only reduces the cutting allowance, thermal effect and noise but it also saves energy and the amount of abrasive materials, reduces initial costs and running costs, and has a low impact on environment.

■Stroke
X-axis: 240mm (nozzle movement)
Y-axis: 200 mm (nozzle movement)
Z-axis: 200 mm (nozzle movement)

It processes more accurately!

katana2cutting By developing an ultrafine abrasive nozzle of Φ0.3 mm, it can process a cutting allowance as fine as 0.3mm.
nozzle image

Features

Accurately processes many types of materials
Besides all the merits of water jet processing, with a newly developed nozzle it can process high-grade products and improve the roughness of the surface.
■Suitable materials:
Glass, stainless steel, copper, CFRP, laminated materials, resin, rubber, foam, paper, etc...
Energy saving, cost saving, space saving
Reduce 60% of abrasive materials.
　Installation space is only 3 m².
　Drastically reduces initial costs and running costs.
We offer full support for operation of all our products.
Everything is designed and manufactured for you, from the ultrahigh-pressure water pump to the main body of the device.
　We also offer support from a technical team after delivery.

katanacompact katana2runningcost

Specifications

Diameter of abrasive nozzle		mm	Φ0.3 - 1.5
Movement range	X-axis	mm	240
	Y-axis		200
	Z-axis		200
Discharged pressure		MPa	Regular use 300, Max. 350
Discharged flow rate		L/min	Max. 0.65
Speed of fast-feeding		m/min	30
Dimensions (body)	Width	mm	750
	Depth	mm	2,050
	Height	mm	2,100
Dimensions (pump)	Width	mm	685
	Depth	mm	1,200
	Height	mm	1,530
Power supply		―	AC 200 V 18 kVA

Application Examples

Machine parts: High-grade curve processing and micro processing for processing resistant materials
Cars, airplanes: Processing products of various kinds that are small in quantity, such as composite resin panels and difficult-to-cut materials
Job-shop: Processing and trial manufacturing new materials
Used instead of laser processing: Processing materials that laser processing does not work well on, such as glass and copper