Superoll MAC: Mechanical Automatic Tool Diameter Controlled Roller Burnishing Tool for Inner Surface Through-hole
This tool is suitable for finishing of works with inconsistent pre-burnishing hole diameter and die-cast parts with draft angle.Since overload can be prevented by automatic tool diameter adjuster, the life time of tool is extended.
Driving unit :Drilling machine, Drilling unit, Lathe, Machining center
Example of using Speroll MAC
Unlike SH Type, automatic tool diameter adjuster is equipped in the body.
Tool diameter is kept its balance point with built-in spring force and burnishing force.
Enabling stable finish surface within the range of max. 0.2mm variability.
Un-processable area of MAC for through hole
Dimensions
Specification
Tool model No. | Tool diameter adjustment range |
Maximum burnishing length |
Tool length | Shank |
---|---|---|---|---|
For throught hole | D [mm] | H [mm] | L [mm] | |
SH450-CAT | 4.45~4.80 | 50 | 134 | φ16X60L |
SH475-CAT | 4.70~5.05 | |||
SH500-CAT | 4.95~5.30 | |||
SH525-CAT | 5.20~5.55 | |||
SH550-CAT | 5.45~5.80 | |||
SH575-CAT | 5.70~6.05 | |||
SH600-CAT | 5.95~6.45 | |||
SH640-CAT | 6.35~6.85 | |||
SH680-CAT | 6.75~7.25 | |||
SH720-CAT | 7.15~7.65 | |||
SH760-CAT | 7.55~8.05 | |||
SH800-CAT | 7.95~8.55 | |||
SH850-CAT | 8.45~9.05 | |||
SH900-CAT | 8.95~9.55 | |||
SH950-CAT | 9.45~10.05 | |||
SH1000-CAT | 9.95~10.55 | |||
SH1050-CAT | 10.45~11.05 | |||
SH1100-CAT | 10.95~11.55 | |||
SH1150-CAT | 11.45~12.05 | |||
SH1200-CAT | 11.95~12.55 | |||
SH1250-CAT | 12.45~13.05 | |||
SH1300-CAT | 12.95~13.55 | |||
SH1350-CAT | 13.45~14.05 | |||
SH1400-CAT | 13.95~14.55 | |||
SH1450-CAT | 14.45~15.05 |
Note ; Please see our Superoll brochure for bigger size,φ15~44.
Examples
- The hole whose tolerance is big
- Make a plateau surface
- A very slight tapered hole